单一低渗透突出煤层水力冲孔工艺优化应用分析

为了有效提高单一低渗透突出煤层的瓦斯抽采效率，以高压水射流冲击理论为指导，针对平煤股份八矿己组突出煤层特征建立数值模型，模拟分析水力冲孔应力分布规律，通过现场实测分析冲孔有效影响范围，进一步优化设计冲孔参数、指导现场施工。现场应用表明，水力冲孔是一种行之有效的方法，对单一低渗透突出煤层实施水力冲孔卸压增透、提高瓦斯抽采效果具有重要意义。     

Natural food mastication capability in preschool children according to their oral condition: A preliminary study

This study investigated, for the first time, the masticatory capability of preschool children using natural foods, and the impact of an early oral health alteration (early childhood caries: ECC) on the granulometry of ready-to-swallow food boluses. Thirteen children with ECC were compared to 13 preschool children with a healthy oral condition. Oral health criteria and NOT-S scores (Nordic Orofacial dysfunction Test-Screening) were recorded. For each child, number of masticatory cycles (Nc), chewing time (Ti), and frequency (Fq = Nc/Ti) were recorded during mastication of raw carrot (CAR), cheese (CHS) and breakfast cereals (CER) samples. Food boluses were collected by stopping children at their food-dependent individual swallowing threshold (Nc), and the median food bolus particle size value (D50) was calculated. Correlations were sought between oral health and masticatory criteria. In the ECC group, mean Fq values were significantly decreased for all three foods (p ≤ .001) and mean D50 values were significantly increased (p ≤ .001) compared to the control group (i.e., D50 CAR = 4,384 μm ± 929 vs. 2,960 μm ± 627). These alterations were related to the extent of ECC. The NOT-S mean global score was significantly increased in children with ECC (2.62 ± 1.37 vs. 1 ± 0.91 in the control group, p ≤ .01), due to “Mastication and swallowing” domain impairment. This study gives granulometric normative values for three foods in preschool children and shows the impact of ECC on D50 values. The progression of children's masticatory capability after dental treatment, and the impact of such modifications of sensory input on future eating habits should be explored.     

Cutting parameter optimization for one-step shaft excavation technique based on parallel cutting method

The outcome of the cutting blasting in a one-step shaft excavation is heavily related to the cutting parameters used for parallel cutting method. In this study, the relationships between the cutting parameters (such as the hole spacing L and the empty hole diameter D) and damage zones were investigated by numerical simulation. A damage state index γ was introduced and used to characterize the crushing and crack damage zones through a user-defined subroutine. Two indices, i.e., η₁ and η₂ that can reflect the cutting performance, were also introduced. The simulation results indicate that an optimal value of L can be obtained so that the η₁ and η₂ can reach their optimal states for the best cutting performance. A larger D results in better cutting performance when the L value maintains its best. In addition, the influences of the loading rate and the in-situ stress on the cutting performance were investigated. It is found that an explosive with a high loading rate is suit for cutting blasting. The propagation direction and the length of the tensile cracks are affected by the direction and the magnitude of the maximum principal stress.     

Structural optimization with an automatic mode identification method for tracking the local vibration mode

Traditional optimization methods, which take a specific order of modal frequency as the design constraint, could fail to obtain the desired solution because of modal substitution. An improved optimization model with continuous sizing variables is established to solve this problem, in which the minimum weight and a given local modal frequency are considered as the objective and the constraint. To capture accurately the expected mode of vibration, a local mode identification technique is proposed based on the strain energy ratio between the local area and the whole structure. With that scheme, an optimization system is developed, in which the local mode can be effectively identified and the constraint can be updated with it in the iteration process. Two numerical examples, of a reinforced plate and a satellite structure, are applied to illustrate the effectiveness and efficacy of the proposed method.     

Solid dispersion adsorbate technique for improved dissolution and flow properties of lurasidone hydrochloride: characterization using 32 factorial design

The aim of the present study was to improve the dissolution and flow properties of lurasidone hydrochloride (LH) by solid dispersion adsorbate (SDA) technique. Solid dispersions (SDs) of LH were prepared by fusion method using Poloxamer P188. The melt dispersion was adsorbed onto the porous carrier Florite (calcium silicate). A 3² factorial design was employed to quantify the effect of two independent variables, namely ratio of carrier (Poloxamer 188) and LH in SD and ratio of adsorbent (Florite) to SD. SDA granules of LH were studied for flow properties and characterized using differential scanning calorimetry, scanning electron microscopy, and X-ray diffraction. Tablets of optimized composition of SDA granules (equivalent to 20?mg of drug) and plain tablets were prepared by direct compression method. The dissolution studies were carried out in Mcllvaine buffer (pH 3.8) as per USFDA guidelines and characterized for parameters such as percent dissolution efficiency, t₅₀, and Q₃₀. Tablets prepared from SDA granules showed almost four-fold increase in cumulative percentage drug release as compared to tablets prepared from plain LH. The value of dissolution efficiency was enhanced from 49.60% for plain tablets to 94.15% for SDA tablets. SDA granules did not show any change in drug release and X-ray diffraction pattern after storage at 40?°C/75% of RH for 3?months, which confirms that Florite prevented conversion of drug from amorphous form to crystalline form improving physical stability of the amorphous state of LH.     

Parallel Multipopulation Differential Evolutionary Particle Swarm Optimization for Voltage and Reactive Power Control

This paper presents parallel multipopulation differential evolutionary particle swarm optimization (DEEPSO) for voltage and reactive power control (VQC). The problem can be formulated as a mixed integer nonlinear optimization problem and various evolutionary computation techniques have been applied to the problem including PSO, differential evolution (DE), and DEEPSO. Since VQC is one of the online controls, speed‐up of computation is required. Moreover, there is still room for improvement in solution quality. This paper applies parallel multipopulation DEEPSO in order to speed up the calculation and improve solution quality. The proposed method is applied to IEEE 30, 57, and 118 bus systems. The results indicate that the proposed method can realize fast computation and minimize more active power losses than the conventional evolutionary computation techniques.     

Effect of ultrasound on the true flotation of lignite and its entrainment behavior

In this study, the ultrasound was fixed in the pulp zone of flotation cell and its effect on the true flotation of lignite was analyzed. Flotation results indicated that the simultaneous ultrasound treatment increased the concentrate yield and decreased the concentrate ash content. Screening analysis of flotation products revealed that the ultrasound could crush coarse coal to fine coal and scanning electron microscopy (SEM) tests indicated that the ultrasound could reduce the coverage of high-ash coal fines on the coarse particle surface. Thus, the flotation recovery of coarse lignite particle was increased. In addition, the true flotation and entrainment of ?0.074 mm fine particles were studied by the sink-float test and the method of Trahar. It was found the ultrasound significantly enhanced the true flotation of fine particles and improved the overall water recovery in lignite flotation.     

绿色住区参数化优化设计平台的开发进展与展望

绿色住区设计是建设宜居城市和实现节能减排目标的重要手段与方法。文章首先回顾绿色住区参数化优化设计方法及平台概况，在此基础上，重点介绍平面生成、噪声计算、通风计算、可视度计算等新增功能和天空遮挡算法升级，以及广州市的工程应用，最后展望平台研发与应用的未来发展方向。